Nature · New South Wales · main summit section · bounded southern view
Mount Kosciuszko: terrain elevation and local relief
Mount Kosciuszko uses an approximately 2,226-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 1,476 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
≈ 2,226 m
Data-derived estimate- Measurement
- Highest sampled surface in the documented Copernicus terrain section · EGM2008
- Subject or version
- New South Wales · main summit section · bounded southern view
- In feet, rounded
- 7,304.6 ft (1 ft = 0.3048 m)
Add more subjects or change the units in the playground.
Terrain boundary, base and datum
- Vertical reference
- EGM2008. Published surveys are separate; no datum conversion is applied.
- Highest sampled surface
- 2226.5 m at -36.456111°, 148.263611°.
- Local base
- 750.2 m at -36.425556°, 148.202222°. Lowest sampled point within this bounded terrain section.
- Section bounds in WGS84-G1150
- West 148.202083°, east 148.324861°; south -36.487361°, north -36.424306°.
- View and scale
- Orthographic map section facing north. Equal horizontal and vertical map scales. Approximate grid spacing: 24.9 m east-west and 30.8 m north-south. Lower and surrounding terrain omitted.
produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved
A little more perspective
The NSW Government’s summit-walk description identifies Mount Kosciuszko at 2,228 meters. This section reaches about 2,226 meters in EGM2008. The broad high country occupies much of the view, while the lowest sampled point lies on the much lower western side of the boundary. That defined local relief is not the ascent along the summit walk from Charlotte Pass.
The local-relief view subtracts the lowest sampled point in this section: 750.2 meters at -36.425556° latitude, 148.202222° longitude. This produces about 1,476 meters of relief within the stated boundary. It is not a universal mountain base, a route’s total ascent, or topographic prominence.
The rendered surface uses the public 2021 Copernicus release, primarily based on TanDEM-X observations from 2011–2015 with infill from other sources. It is a surface model rather than a current bare-earth survey. Neutral shading explains the geometry without claiming a snow season or photographic ground texture. No datum conversion or summit correction is applied.
Quick facts
Mount Kosciuszko uses an approximately 2,226-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 1,476 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
For a presentation or a research note, include the subject, the measurement definition, and the measurement used. A picture alone cannot explain those choices. The comparison guide explains how to export an image and its source notes together.
Sources and measurement notes
- NSW Government: Mount Kosciuszko Summit walk
- Copernicus DEM: dataset definition, datums and attribution
- Public Copernicus GLO-30 release documentation
- Wikidata: summit-area identity and initial coordinate
- Copernicus source terrain tile 1 (GeoTIFF)
The sampled surface is approximately 2,226 meters, close numerically to the published 2,228-meter summit reference. Numerical agreement does not establish identical survey methods or vertical datums.
Source review recorded . Maintained by Ishan Karunaratne. Suggest a correction with a source and the exact measurement being compared.