Nature · Machhapuchhre · Annapurna-region summit section
Machapuchare: terrain elevation and local relief
Machapuchare uses an approximately 6,862-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 4,033 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
≈ 6,862 m
Data-derived estimate- Measurement
- Highest sampled surface in the documented Copernicus terrain section · EGM2008
- Subject or version
- Machhapuchhre · Annapurna-region summit section
- In feet, rounded
- 22,512.2 ft (1 ft = 0.3048 m)
Add more subjects or change the units in the playground.
Terrain boundary, base and datum
- Vertical reference
- EGM2008. Published surveys are separate; no datum conversion is applied.
- Highest sampled surface
- 6861.7 m at 28.498056°, 83.945556°.
- Local base
- 2828.8 m at 28.470278°, 84.005000°. Lowest sampled point within this bounded terrain section.
- Section bounds in WGS84-G1150
- West 83.892917°, east 84.005139°; south 28.463750°, north 28.526806°.
- View and scale
- Orthographic map section facing north. Equal horizontal and vertical map scales. Approximate grid spacing: 27.2 m east-west and 30.8 m north-south. Lower and surrounding terrain omitted.
produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved
A little more perspective
Nepal Tourism Board’s Natural Treasures of Nepal lists Machhapuchhre at 6,993 meters. This bounded Copernicus section reaches approximately 6,862 meters in EGM2008, with the surface maximum about 490 meters from the generalized identity coordinate. That offset is documented rather than treating the coordinate as a surveyed summit marker. The narrow summit geometry is softened by the source grid; no climb or present-day summit survey is implied.
The local-relief view subtracts the lowest sampled point in this section: 2828.8 meters at 28.470278° latitude, 84.005000° longitude. This produces about 4,033 meters of relief within the stated boundary. It is not a universal mountain base, a route’s total ascent, or topographic prominence.
The rendered surface uses the public 2021 Copernicus release, primarily based on TanDEM-X observations from 2011–2015 with infill from other sources. It is a surface model rather than a current bare-earth survey. Neutral shading explains the geometry without claiming a snow season or photographic ground texture. No datum conversion or summit correction is applied.
Quick facts
Machapuchare uses an approximately 6,862-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 4,033 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
For a presentation or a research note, include the subject, the measurement definition, and the measurement used. A picture alone cannot explain those choices. The comparison guide explains how to export an image and its source notes together.
Sources and measurement notes
- Nepal Tourism Board: Natural Treasures of Nepal, Annapurna region
- Copernicus DEM: dataset definition, datums and attribution
- Public Copernicus GLO-30 release documentation
- Wikidata: summit-area identity and initial coordinate
- Copernicus source terrain tile 1 (GeoTIFF)
- Copernicus source terrain tile 2 (GeoTIFF)
The selected mountain remains searchable as Machapuchare or Machhapuchhre. Its 6,993-meter published reference stays independent of the approximately 6,862-meter surface.
Source review recorded . Maintained by Ishan Karunaratne. Suggest a correction with a source and the exact measurement being compared.