Nature · Swiss Alps · bounded section excluding Mönch
Eiger: terrain elevation and local relief
Eiger uses an approximately 3,955-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 3,029 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
≈ 3,955 m
Data-derived estimate- Measurement
- Highest sampled surface in the documented Copernicus terrain section · EGM2008
- Subject or version
- Swiss Alps · bounded section excluding Mönch
- In feet, rounded
- 12,974.5 ft (1 ft = 0.3048 m)
Add more subjects or change the units in the playground.
Terrain boundary, base and datum
- Vertical reference
- EGM2008. Published surveys are separate; no datum conversion is applied.
- Highest sampled surface
- 3954.6 m at 46.577222°, 8.005000°.
- Local base
- 925.2 m at 46.626944°, 8.008611°. Lowest sampled point within this bounded terrain section.
- Section bounds in WGS84-G1150
- West 7.933472°, east 8.077083°; south 46.575694°, north 46.627083°.
- View and scale
- Orthographic map section facing north. Equal horizontal and vertical map scales. Approximate grid spacing: 21.3 m east-west and 30.9 m north-south. Lower and surrounding terrain omitted.
produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved
A little more perspective
The Swiss Alpine Club route portal lists the Eiger at 3,967 meters. This Copernicus section reaches approximately 3,955 meters in EGM2008. Its southern boundary was reduced after the initial wider window selected neighboring Mönch. The view remains an orthographic look northward from the south; it is not a photograph of the Eiger’s famous north face. The northward terrain extent and exact base are documented separately.
The local-relief view subtracts the lowest sampled point in this section: 925.2 meters at 46.626944° latitude, 8.008611° longitude. This produces about 3,029 meters of relief within the stated boundary. It is not a universal mountain base, a route’s total ascent, or topographic prominence.
The rendered surface uses the public 2021 Copernicus release, primarily based on TanDEM-X observations from 2011–2015 with infill from other sources. It is a surface model rather than a current bare-earth survey. Neutral shading explains the geometry without claiming a snow season or photographic ground texture. No datum conversion or summit correction is applied.
Quick facts
Eiger uses an approximately 3,955-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 3,029 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
For a presentation or a research note, include the subject, the measurement definition, and the measurement used. A picture alone cannot explain those choices. The comparison guide explains how to export an image and its source notes together.
Sources and measurement notes
- Swiss Alpine Club: Eiger route-portal elevation
- Copernicus DEM: dataset definition, datums and attribution
- Public Copernicus GLO-30 release documentation
- Wikidata: summit-area identity and initial coordinate
- Copernicus source terrain tile 1 (GeoTIFF)
- Copernicus source terrain tile 2 (GeoTIFF)
The selected peak is the Eiger, with a 3,967-meter SAC reference and approximately 3,955-meter modeled maximum. Mönch is excluded as the measurement source.
Source review recorded . Maintained by Ishan Karunaratne. Suggest a correction with a source and the exact measurement being compared.