Nature · Principal summit · bounded southern view
Dhaulagiri I: terrain elevation and local relief
Dhaulagiri I uses an approximately 8,136-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 4,600 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
≈ 8,136 m
Data-derived estimate- Measurement
- Highest sampled surface in the documented Copernicus terrain section · EGM2008
- Subject or version
- Principal summit · bounded southern view
- In feet, rounded
- 26,692.6 ft (1 ft = 0.3048 m)
Add more subjects or change the units in the playground.
Terrain boundary, base and datum
- Vertical reference
- EGM2008. Published surveys are separate; no datum conversion is applied.
- Highest sampled surface
- 8135.9 m at 28.698056°, 83.489444°.
- Local base
- 3535.5 m at 28.695556°, 83.438889°. Lowest sampled point within this bounded terrain section.
- Section bounds in WGS84-G1150
- West 83.438750°, east 83.551250°; south 28.664861°, north 28.727917°.
- View and scale
- Orthographic map section facing north. Equal horizontal and vertical map scales. Approximate grid spacing: 27.1 m east-west and 30.8 m north-south. Lower and surrounding terrain omitted.
produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018 provided under COPERNICUS by the European Union and ESA; all rights reserved
A little more perspective
Nepal Tourism Board lists Dhaulagiri at 8,167 meters. This record represents Dhaulagiri I, the principal summit, rather than every peak carrying the massif’s name. The bounded Copernicus section reaches about 8,136 meters in EGM2008; its lower ridges and sampled base remain at their original elevations.
The local-relief view subtracts the lowest sampled point in this section: 3535.5 meters at 28.695556° latitude, 83.438889° longitude. This produces about 4,600 meters of relief within the stated boundary. It is not a universal mountain base, a route’s total ascent, or topographic prominence.
The rendered surface uses the public 2021 Copernicus release, primarily based on TanDEM-X observations from 2011–2015 with infill from other sources. It is a surface model rather than a current bare-earth survey. Neutral shading explains the geometry without claiming a snow season or photographic ground texture. No datum conversion or summit correction is applied.
Quick facts
Dhaulagiri I uses an approximately 8,136-meter surface estimate in EGM2008 from Copernicus GLO-30. The bounded terrain section has about 4,600 meters of local relief above its lowest sampled point. Published summit surveys are separate references.
For a presentation or a research note, include the subject, the measurement definition, and the measurement used. A picture alone cannot explain those choices. The comparison guide explains how to export an image and its source notes together.
Sources and measurement notes
- Nepal Tourism Board: Dhaulagiri
- Copernicus DEM: dataset definition, datums and attribution
- Public Copernicus GLO-30 release documentation
- Copernicus source terrain tile 1 (GeoTIFF)
Dhaulagiri I’s approximately 8,136-meter modeled surface and the 8,167-meter published listing are separate references.
Source review recorded . Maintained by Ishan Karunaratne. Suggest a correction with a source and the exact measurement being compared.